RaveDash

A Service Bus Message.

• properties (MessageProperties) – Properties of the internal AMQP message object.

• header (MessageHeader) – Header of the internal AMQP message object.

• message (Message) – Internal AMQP message object.

body (str or bytes) – The data to send in a single message.

• encoding (str) – The encoding for string data. Default is UTF-8.

• session_id (str) – An optional session ID for the message to be sent.

Example:

message = Message("Hello World!!") message.session_id = "MySessionID" message.partition_key = "UsingSpecificPartition" message.user_properties = {'data': 'custom_data'} message.time_to_live = datetime.timedelta(seconds=30) 

The annotations of the message.

dict

The body of the Message.

bytes or generator[bytes]

int

rtype

str

rtype

Get or set the utc scheduled enqueue time to the message. This property can be used for scheduling when sending a message through ServiceBusSender.send method. If cancelling scheduled messages is required, you should use the ServiceBusSender.schedule method, which returns sequence numbers that can be used for future cancellation. scheduled_enqueue_time_utc is None if not set.

datetime

The session id of the message

str

~datetime.timedelta

rtype

User defined properties on the message.

dict

str

rtype

A batch of messages.

Sending messages in a batch is more performant than sending individual message. BatchMessage helps you create the maximum allowed size batch of Message to improve sending performance.

Use the add method to add messages until the maximum batch size limit in bytes has been reached - at which point a ValueError will be raised.

Please use the create_batch method of ServiceBusSender to create a BatchMessage object instead of instantiating a BatchMessage object directly.

• max_size_in_bytes (int) – The maximum size of bytes data that a BatchMessage object can hold.

• message (BatchMessage) – Internal AMQP BatchMessage object.

max_size_in_bytes (int) – The maximum size of bytes data that a BatchMessage object can hold.

Try to add a single Message to the batch.

The total size of an added message is the sum of its body, properties, etc. If this added size results in the batch exceeding the maximum batch size, a ValueError will be raised.

message (Message) – The Message to be added to the batch.

None

~azure.servicebus.exceptions.MessageContentTooLarge, when exceeding the size limit.

The combined size of the events in the batch, in bytes.

int

A preview message.

This message is still on the queue, and unlocked. A peeked message cannot be completed, abandoned, dead-lettered or deferred. It has no lock token or expiry.

received_timestamp_utc (datetime.datetime) – The utc timestamp of when the message is received.

The annotations of the message.

dict

The body of the Message.

bytes or generator[bytes]

int

rtype

~datetime.datetime

rtype

int

rtype

str

rtype

Get or set the utc scheduled enqueue time to the message. This property can be used for scheduling when sending a message through ServiceBusSender.send method. If cancelling scheduled messages is required, you should use the ServiceBusSender.schedule method, which returns sequence numbers that can be used for future cancellation. scheduled_enqueue_time_utc is None if not set.

datetime

int

rtype

The session id of the message

str

Whether the message has been settled.

This will aways be True for a message received using ReceiveAndDelete mode, otherwise it will be False until the message is completed or otherwise settled.

bool

~datetime.timedelta

rtype

User defined properties on the message.

dict

str

rtype

A Service Bus Message received from service side.

auto_renew_error (AutoLockRenewTimeout or AutoLockRenewFailed) – Error when AutoLockRenew is used and it fails to renew the message lock.

Example:

 messages = servicebus_receiver.receive(max_wait_time=5) for message in messages: print("Receiving: {}".format(message)) print("Time to live: {}".format(message.time_to_live)) print("Sequence number: {}".format(message.sequence_number)) print("Enqueue Sequence numger: {}".format(message.enqueue_sequence_number)) print("Partition ID: {}".format(message.partition_id)) print("Partition Key: {}".format(message.partition_key)) print("User Properties: {}".format(message.user_properties)) print("Annotations: {}".format(message.annotations)) print("Delivery count: {}".format(message.header.delivery_count)) print("Message ID: {}".format(message.properties.message_id)) print("Locked until: {}".format(message.locked_until_utc)) print("Lock Token: {}".format(message.lock_token)) print("Enqueued time: {}".format(message.enqueued_time_utc)) 

Abandon the message.

This message will be returned to the queue and made available to be received again.

None

~azure.servicebus.exceptions.MessageAlreadySettled if the message has been settled.

~azure.servicebus.exceptions.MessageLockExpired if message lock has already expired.

~azure.servicebus.exceptions.SessionLockExpired if session lock has already expired.

~azure.servicebus.exceptions.MessageSettleFailed if message settle operation fails.

Complete the message.

This removes the message from the queue.

None

~azure.servicebus.exceptions.MessageAlreadySettled if the message has been settled.

~azure.servicebus.exceptions.MessageLockExpired if message lock has already expired.

~azure.servicebus.exceptions.SessionLockExpired if session lock has already expired.

~azure.servicebus.exceptions.MessageSettleFailed if message settle operation fails.

Move the message to the Dead Letter queue.

The Dead Letter queue is a sub-queue that can be used to store messages that failed to process correctly, or otherwise require further inspection or processing. The queue can also be configured to send expired messages to the Dead Letter queue.

• reason (str) – The reason for dead-lettering the message.

• description (str) – The detailed description for dead-lettering the message.

None

~azure.servicebus.exceptions.MessageAlreadySettled if the message has been settled.

~azure.servicebus.exceptions.MessageLockExpired if message lock has already expired.

~azure.servicebus.exceptions.SessionLockExpired if session lock has already expired.

~azure.servicebus.exceptions.MessageSettleFailed if message settle operation fails.

Defer the message.

This message will remain in the queue but must be requested specifically by its sequence number in order to be received.

None

~azure.servicebus.exceptions.MessageAlreadySettled if the message has been settled.

~azure.servicebus.exceptions.MessageLockExpired if message lock has already expired.

~azure.servicebus.exceptions.SessionLockExpired if session lock has already expired.

~azure.servicebus.exceptions.MessageSettleFailed if message settle operation fails.

Renew the message lock.

This will maintain the lock on the message to ensure it is not returned to the queue to be reprocessed. In order to complete (or otherwise settle) the message, the lock must be maintained. Messages received via ReceiveAndDelete mode are not locked, and therefore cannot be renewed. This operation can also be performed as a threaded background task by registering the message with an azure.servicebus.AutoLockRenew instance. This operation is only available for non-sessionful messages.

None

TypeError if the message is sessionful.

~azure.servicebus.exceptions.MessageLockExpired is message lock has already expired.

~azure.servicebus.exceptions.MessageAlreadySettled is message has already been settled.

The annotations of the message.

dict

The body of the Message.

bytes or generator[bytes]

int

rtype

~datetime.datetime

rtype

bool

rtype

~uuid.UUID or str

rtype

datetime.datetime

rtype

int

rtype

str

rtype

Get or set the utc scheduled enqueue time to the message. This property can be used for scheduling when sending a message through ServiceBusSender.send method. If cancelling scheduled messages is required, you should use the ServiceBusSender.schedule method, which returns sequence numbers that can be used for future cancellation. scheduled_enqueue_time_utc is None if not set.

datetime

int

rtype

The session id of the message

str

Whether the message has been settled.

This will aways be True for a message received using ReceiveAndDelete mode, otherwise it will be False until the message is completed or otherwise settled.

bool

~datetime.timedelta

rtype

User defined properties on the message.

dict

str

rtype

An enumeration.

The ServiceBusClient class defines a high level interface for getting ServiceBusSender and ServiceBusReceiver.

fully_qualified_namespace (str) – The fully qualified host name for the Service Bus namespace. The namespace format is: <yournamespace>.servicebus.windows.net.

• fully_qualified_namespace (str) – The fully qualified host name for the Service Bus namespace. The namespace format is: <yournamespace>.servicebus.windows.net.

• credential (TokenCredential) – The credential object used for authentication which implements a particular interface for getting tokens. It accepts ServiceBusSharedKeyCredential, or credential objects generated by the azure-identity library and objects that implement the get_token(self, *scopes) method.

• entity_name (str) – Optional entity name, this can be the name of Queue or Topic. It must be specified if the credential is for specific Queue or Topic.

• logging_enable (bool) – Whether to output network trace logs to the logger. Default is False.

• transport_type (TransportType) – The type of transport protocol that will be used for communicating with the Service Bus service. Default is TransportType.Amqp.

• http_proxy (dict) – HTTP proxy settings. This must be a dictionary with the following keys: ‘proxy_hostname’ (str value) and ‘proxy_port’ (int value). Additionally the following keys may also be present: ‘username’, ‘password’.

Example:

import os from azure.servicebus import ServiceBusClient, ServiceBusSharedKeyCredential fully_qualified_namespace = os.environ['SERVICE_BUS_FULLY_QUALIFIED_NAMESPACE'] shared_access_policy = os.environ['SERVICE_BUS_SAS_POLICY'] shared_access_key = os.environ['SERVICE_BUS_SAS_KEY'] servicebus_client = ServiceBusClient( fully_qualified_namespace=fully_qualified_namespace, credential=ServiceBusSharedKeyCredential( shared_access_policy, shared_access_key ) ) 

Close down the ServiceBus client and the underlying connection.

None

Create a ServiceBusClient from a connection string.

conn_str (str) – The connection string of a Service Bus.

• entity_name (str) – Optional entity name, this can be the name of Queue or Topic. It must be specified if the credential is for specific Queue or Topic.

• logging_enable (bool) – Whether to output network trace logs to the logger. Default is False.

• transport_type (TransportType) – The type of transport protocol that will be used for communicating with the Service Bus service. Default is TransportType.Amqp.

• http_proxy (dict) – HTTP proxy settings. This must be a dictionary with the following keys: ‘proxy_hostname’ (str value) and ‘proxy_port’ (int value). Additionally the following keys may also be present: ‘username’, ‘password’.

ServiceBusClient

Example:

import os from azure.servicebus import ServiceBusClient servicebus_connection_str = os.environ['SERVICE_BUS_CONNECTION_STR'] servicebus_client = ServiceBusClient.from_connection_string(conn_str=servicebus_connection_str) 

Get ServiceBusReceiver for the specific queue.

queue_name (str) – The path of specific Service Bus Queue the client connects to.

• mode (ReceiveSettleMode) – The mode with which messages will be retrieved from the entity. The two options are PeekLock and ReceiveAndDelete. Messages received with PeekLock must be settled within a given lock period before they will be removed from the queue. Messages received with ReceiveAndDelete will be immediately removed from the queue, and cannot be subsequently rejected or re-received if the client fails to process the message. The default mode is PeekLock.

• prefetch (int) – The maximum number of messages to cache with each request to the service. The default value is 0, meaning messages will be received from the service and processed one at a time. Increasing this value will improve message throughput performance but increase the change that messages will expire while they are cached if they’re not processed fast enough.

• idle_timeout (float) – The timeout in seconds between received messages after which the receiver will automatically shutdown. The default value is 0, meaning no timeout.

• retry_total (int) – The total number of attempts to redo a failed operation when an error occurs. Default value is 3.

ServiceBusReceiver

ServiceBusConnectionError ServiceBusAuthorizationError

Example:

import os from azure.servicebus import ServiceBusClient servicebus_connection_str = os.environ['SERVICE_BUS_CONNECTION_STR'] queue_name = os.environ['SERVICE_BUS_QUEUE_NAME'] servicebus_client = ServiceBusClient.from_connection_string(conn_str=servicebus_connection_str) with servicebus_client: queue_receiver = servicebus_client.get_queue_receiver(queue_name=queue_name) 

Get ServiceBusSender for the specific queue.

queue_name (str) – The path of specific Service Bus Queue the client connects to.

retry_total (int) – The total number of attempts to redo a failed operation when an error occurs. Default value is 3.

ServiceBusSender

ServiceBusConnectionError ServiceBusAuthorizationError

Example:

import os from azure.servicebus import ServiceBusClient servicebus_connection_str = os.environ['SERVICE_BUS_CONNECTION_STR'] queue_name = os.environ['SERVICE_BUS_QUEUE_NAME'] servicebus_client = ServiceBusClient.from_connection_string(conn_str=servicebus_connection_str) with servicebus_client: queue_sender = servicebus_client.get_queue_sender(queue_name=queue_name) 

Get ServiceBusSessionReceiver for the specific queue.

• queue_name (str) – The path of specific Service Bus Queue the client connects to.

• session_id (str) – A specific session from which to receive. This must be specified for a sessionful entity, otherwise it must be None. In order to receive messages from the next available session, set this to None. The default is None.

• idle_timeout (int) – The timeout in seconds between received messages after which the receiver will automatically shutdown. The default value is 0, meaning no timeout.

• mode (ReceiveSettleMode) – The mode with which messages will be retrieved from the entity. The two options are PeekLock and ReceiveAndDelete. Messages received with PeekLock must be settled within a given lock period before they will be removed from the queue. Messages received with ReceiveAndDelete will be immediately removed from the queue, and cannot be subsequently rejected or re-received if the client fails to process the message. The default mode is PeekLock.

• prefetch (int) – The maximum number of messages to cache with each request to the service. The default value is 0, meaning messages will be received from the service and processed one at a time. Increasing this value will improve message throughput performance but increase the change that messages will expire while they are cached if they’re not processed fast enough.

• idle_timeout (float) – The timeout in seconds between received messages after which the receiver will automatically shutdown. The default value is 0, meaning no timeout.

• retry_total (int) – The total number of attempts to redo a failed operation when an error occurs. Default value is 3.

ServiceBusSessionReceiver

ServiceBusConnectionError ServiceBusAuthorizationError

Example:

import os from azure.servicebus import ServiceBusClient servicebus_connection_str = os.environ['SERVICE_BUS_CONNECTION_STR'] queue_name = os.environ['SERVICE_BUS_QUEUE_NAME'] servicebus_client = ServiceBusClient.from_connection_string(conn_str=servicebus_connection_str) with servicebus_client: queue_receiver = servicebus_client.get_queue_receiver(queue_name=queue_name) 

Get ServiceBusReceiver for the specific subscription under the topic.

• topic_name (str) – The name of specific Service Bus Topic the client connects to.

• subscription_name (str) – The name of specific Service Bus Subscription under the given Service Bus Topic.

• mode (ReceiveSettleMode) – The mode with which messages will be retrieved from the entity. The two options are PeekLock and ReceiveAndDelete. Messages received with PeekLock must be settled within a given lock period before they will be removed from the subscription. Messages received with ReceiveAndDelete will be immediately removed from the subscription, and cannot be subsequently rejected or re-received if the client fails to process the message. The default mode is PeekLock.

• prefetch (int) – The maximum number of messages to cache with each request to the service. The default value is 0, meaning messages will be received from the service and processed one at a time. Increasing this value will improve message throughput performance but increase the change that messages will expire while they are cached if they’re not processed fast enough.

• idle_timeout (float) – The timeout in seconds between received messages after which the receiver will automatically shutdown. The default value is 0, meaning no timeout.

• retry_total (int) – The total number of attempts to redo a failed operation when an error occurs. Default value is 3.

• retry_backoff_factor (float) – Delta back-off internal in the unit of second between retries. Default value is 0.8.

• retry_backoff_max (float) – Maximum back-off interval in the unit of second. Default value is 120.

ServiceBusReceiver

Example:

import os from azure.servicebus import ServiceBusClient servicebus_connection_str = os.environ['SERVICE_BUS_CONNECTION_STR'] topic_name = os.environ["SERVICE_BUS_TOPIC_NAME"] subscription_name = os.environ["SERVICE_BUS_SUBSCRIPTION_NAME"] servicebus_client = ServiceBusClient.from_connection_string(conn_str=servicebus_connection_str) with servicebus_client: subscription_receiver = servicebus_client.get_subscription_receiver( topic_name=topic_name, subscription_name=subscription_name, ) 

Get ServiceBusReceiver for the specific subscription under the topic.

• topic_name (str) – The name of specific Service Bus Topic the client connects to.

• subscription_name (str) – The name of specific Service Bus Subscription under the given Service Bus Topic.

• session_id (str) – A specific session from which to receive. This must be specified for a sessionful entity, otherwise it must be None. In order to receive messages from the next available session, set this to None. The default is None.

• mode (ReceiveSettleMode) – The mode with which messages will be retrieved from the entity. The two options are PeekLock and ReceiveAndDelete. Messages received with PeekLock must be settled within a given lock period before they will be removed from the subscription. Messages received with ReceiveAndDelete will be immediately removed from the subscription, and cannot be subsequently rejected or re-received if the client fails to process the message. The default mode is PeekLock.

• prefetch (int) – The maximum number of messages to cache with each request to the service. The default value is 0, meaning messages will be received from the service and processed one at a time. Increasing this value will improve message throughput performance but increase the change that messages will expire while they are cached if they’re not processed fast enough.

• idle_timeout (float) – The timeout in seconds between received messages after which the receiver will automatically shutdown. The default value is 0, meaning no timeout.

• retry_total (int) – The total number of attempts to redo a failed operation when an error occurs. Default value is 3.

• retry_backoff_factor (float) – Delta back-off internal in the unit of second between retries. Default value is 0.8.

• retry_backoff_max (float) – Maximum back-off interval in the unit of second. Default value is 120.

ServiceBusReceiver

Example:

import os from azure.servicebus import ServiceBusClient servicebus_connection_str = os.environ['SERVICE_BUS_CONNECTION_STR'] topic_name = os.environ["SERVICE_BUS_TOPIC_NAME"] subscription_name = os.environ["SERVICE_BUS_SUBSCRIPTION_NAME"] servicebus_client = ServiceBusClient.from_connection_string(conn_str=servicebus_connection_str) with servicebus_client: subscription_receiver = servicebus_client.get_subscription_receiver( topic_name=topic_name, subscription_name=subscription_name, ) 

Get ServiceBusSender for the specific topic.

topic_name (str) – The path of specific Service Bus Topic the client connects to.

• retry_total (int) – The total number of attempts to redo a failed operation when an error occurs. Default value is 3.

• retry_backoff_factor (float) – Delta back-off internal in the unit of second between retries. Default value is 0.8.

• retry_backoff_max (float) – Maximum back-off interval in the unit of second. Default value is 120.

ServiceBusSender

Example:

import os from azure.servicebus import ServiceBusClient servicebus_connection_str = os.environ['SERVICE_BUS_CONNECTION_STR'] topic_name = os.environ['SERVICE_BUS_TOPIC_NAME'] servicebus_client = ServiceBusClient.from_connection_string(conn_str=servicebus_connection_str) with servicebus_client: topic_sender = servicebus_client.get_topic_sender(topic_name=topic_name) 

The ServiceBusReceiver class defines a high level interface for receiving messages from the Azure Service Bus Queue or Topic Subscription.

• fully_qualified_namespace (str) – The fully qualified host name for the Service Bus namespace. The namespace format is: <yournamespace>.servicebus.windows.net.

• entity_path (str) – The path of the entity that the client connects to.

• fully_qualified_namespace (str) – The fully qualified host name for the Service Bus namespace. The namespace format is: <yournamespace>.servicebus.windows.net.

• credential (TokenCredential) – The credential object used for authentication which implements a particular interface for getting tokens. It accepts ServiceBusSharedKeyCredential, or credential objects generated by the azure-identity library and objects that implement the get_token(self, *scopes) method.

• queue_name (str) – The path of specific Service Bus Queue the client connects to.

• topic_name (str) – The path of specific Service Bus Topic which contains the Subscription the client connects to.

• subscription_name (str) – The path of specific Service Bus Subscription under the specified Topic the client connects to.

• prefetch (int) – The maximum number of messages to cache with each request to the service. The default value is 0, meaning messages will be received from the service and processed one at a time. Increasing this value will improve message throughput performance but increase the change that messages will expire while they are cached if they’re not processed fast enough.

• idle_timeout (float) – The timeout in seconds between received messages after which the receiver will automatically shutdown. The default value is 0, meaning no timeout.

• mode (ReceiveSettleMode) – The mode with which messages will be retrieved from the entity. The two options are PeekLock and ReceiveAndDelete. Messages received with PeekLock must be settled within a given lock period before they will be removed from the queue. Messages received with ReceiveAndDelete will be immediately removed from the queue, and cannot be subsequently rejected or re-received if the client fails to process the message. The default mode is PeekLock.

• logging_enable (bool) – Whether to output network trace logs to the logger. Default is False.

• retry_total (int) – The total number of attempts to redo a failed operation when an error occurs. Default value is 3.

• transport_type (TransportType) – The type of transport protocol that will be used for communicating with the Service Bus service. Default is TransportType.Amqp.

• http_proxy (dict) – HTTP proxy settings. This must be a dictionary with the following keys: ‘proxy_hostname’ (str value) and ‘proxy_port’ (int value). Additionally the following keys may also be present: ‘username’, ‘password’.

Example:

import os from azure.servicebus import ServiceBusReceiver, ServiceBusSharedKeyCredential fully_qualified_namespace = os.environ['SERVICE_BUS_FULLY_QUALIFIED_NAMESPACE'] shared_access_policy = os.environ['SERVICE_BUS_SAS_POLICY'] shared_access_key = os.environ['SERVICE_BUS_SAS_KEY'] queue_name = os.environ['SERVICE_BUS_QUEUE_NAME'] queue_receiver = ServiceBusReceiver( fully_qualified_namespace=fully_qualified_namespace, credential=ServiceBusSharedKeyCredential( shared_access_policy, shared_access_key ), queue_name=queue_name ) 

Close down the handler links (and connection if the handler uses a separate connection).

If the handler has already closed, this operation will do nothing.

None

Create a ServiceBusReceiver from a connection string.

conn_str – The connection string of a Service Bus.

• queue_name (str) – The path of specific Service Bus Queue the client connects to.

• topic_name (str) – The path of specific Service Bus Topic which contains the Subscription the client connects to.

• subscription_name (str) – The path of specific Service Bus Subscription under the specified Topic the client connects to.

• mode (ReceiveSettleMode) – The mode with which messages will be retrieved from the entity. The two options are PeekLock and ReceiveAndDelete. Messages received with PeekLock must be settled within a given lock period before they will be removed from the queue. Messages received with ReceiveAndDelete will be immediately removed from the queue, and cannot be subsequently rejected or re-received if the client fails to process the message. The default mode is PeekLock.

• prefetch (int) – The maximum number of messages to cache with each request to the service. The default value is 0, meaning messages will be received from the service and processed one at a time. Increasing this value will improve message throughput performance but increase the change that messages will expire while they are cached if they’re not processed fast enough.

• idle_timeout (float) – The timeout in seconds between received messages after which the receiver will automatically shutdown. The default value is 0, meaning no timeout.

• logging_enable (bool) – Whether to output network trace logs to the logger. Default is False.

• retry_total (int) – The total number of attempts to redo a failed operation when an error occurs. Default value is 3.

• transport_type (TransportType) – The type of transport protocol that will be used for communicating with the Service Bus service. Default is TransportType.Amqp.

• http_proxy (dict) – HTTP proxy settings. This must be a dictionary with the following keys: ‘proxy_hostname’ (str value) and ‘proxy_port’ (int value). Additionally the following keys may also be present: ‘username’, ‘password’.

ServiceBusReceiverClient

Example:

import os from azure.servicebus import ServiceBusReceiver servicebus_connection_str = os.environ['SERVICE_BUS_CONNECTION_STR'] queue_name = os.environ['SERVICE_BUS_QUEUE_NAME'] queue_receiver = ServiceBusReceiver.from_connection_string( conn_str=servicebus_connection_str, queue_name=queue_name ) 

Browse messages currently pending in the queue.

Peeked messages are not removed from queue, nor are they locked. They cannot be completed, deferred or dead-lettered.

• message_count (int) – The maximum number of messages to try and peek. The default value is 1.

• sequence_number (int) – A message sequence number from which to start browsing messages.

list[PeekMessage]

Example:

with servicebus_receiver: messages = servicebus_receiver.peek() for message in messages: print(message) 

Receive a batch of messages at once.

This approach it optimal if you wish to process multiple messages simultaneously. Note that the number of messages retrieved in a single batch will be dependent on whether prefetch was set for the receiver. This call will prioritize returning quickly over meeting a specified batch size, and so will return as soon as at least one message is received and there is a gap in incoming messages regardless of the specified batch size.

• max_batch_size (int) – Maximum number of messages in the batch. Actual number returned will depend on prefetch size and incoming stream rate.

• max_wait_time (float) – Maximum time to wait in seconds for the first message to arrive. If no messages arrive, and no timeout is specified, this call will not return until the connection is closed. If specified, an no messages arrive within the timeout period, an empty list will be returned.

list[Message]

Example:

with servicebus_receiver: messages = servicebus_receiver.receive(max_wait_time=5) for message in messages: print(message) message.complete() 

Receive messages that have previously been deferred.

When receiving deferred messages from a partitioned entity, all of the supplied sequence numbers must be messages from the same partition.

sequence_numbers (list[int]) – A list of the sequence numbers of messages that have been deferred.

list[ReceivedMessage]

Example:

with servicebus_receiver: deferred_sequenced_numbers = [] messages = servicebus_receiver.receive(max_wait_time=5) for message in messages: deferred_sequenced_numbers.append(message.sequence_number) print(message) message.defer() received_deferred_msg = servicebus_receiver.receive_deferred_messages( sequence_numbers=deferred_sequenced_numbers ) for msg in received_deferred_msg: msg.complete() 

The ServiceBusSessionReceiver class defines a high level interface for receiving messages from the Azure Service Bus Queue or Topic Subscription while utilizing a session for FIFO and ownership semantics.

• fully_qualified_namespace (str) – The fully qualified host name for the Service Bus namespace. The namespace format is: <yournamespace>.servicebus.windows.net.

• entity_path (str) – The path of the entity that the client connects to.

• fully_qualified_namespace (str) – The fully qualified host name for the Service Bus namespace. The namespace format is: <yournamespace>.servicebus.windows.net.

• credential (TokenCredential) – The credential object used for authentication which implements a particular interface for getting tokens. It accepts ServiceBusSharedKeyCredential, or credential objects generated by the azure-identity library and objects that implement the get_token(self, *scopes) method.

• queue_name (str) – The path of specific Service Bus Queue the client connects to.

• topic_name (str) – The path of specific Service Bus Topic which contains the Subscription the client connects to.

• subscription_name (str) – The path of specific Service Bus Subscription under the specified Topic the client connects to.

• prefetch (int) – The maximum number of messages to cache with each request to the service. The default value is 0, meaning messages will be received from the service and processed one at a time. Increasing this value will improve message throughput performance but increase the change that messages will expire while they are cached if they’re not processed fast enough.

• idle_timeout (float) – The timeout in seconds between received messages after which the receiver will automatically shutdown. The default value is 0, meaning no timeout.

• mode (ReceiveSettleMode) – The mode with which messages will be retrieved from the entity. The two options are PeekLock and ReceiveAndDelete. Messages received with PeekLock must be settled within a given lock period before they will be removed from the queue. Messages received with ReceiveAndDelete will be immediately removed from the queue, and cannot be subsequently rejected or re-received if the client fails to process the message. The default mode is PeekLock.

• session_id (str) – A specific session from which to receive. This must be specified for a sessionful entity, otherwise it must be None. In order to receive messages from the next available session, set this to None. The default is None.

• logging_enable (bool) – Whether to output network trace logs to the logger. Default is False.

• retry_total (int) – The total number of attempts to redo a failed operation when an error occurs. Default value is 3.

• transport_type (TransportType) – The type of transport protocol that will be used for communicating with the Service Bus service. Default is TransportType.Amqp.

• http_proxy (dict) – HTTP proxy settings. This must be a dictionary with the following keys: ‘proxy_hostname’ (str value) and ‘proxy_port’ (int value). Additionally the following keys may also be present: ‘username’, ‘password’.

Example:

import os from azure.servicebus import ServiceBusReceiver, ServiceBusSharedKeyCredential fully_qualified_namespace = os.environ['SERVICE_BUS_FULLY_QUALIFIED_NAMESPACE'] shared_access_policy = os.environ['SERVICE_BUS_SAS_POLICY'] shared_access_key = os.environ['SERVICE_BUS_SAS_KEY'] queue_name = os.environ['SERVICE_BUS_QUEUE_NAME'] queue_receiver = ServiceBusReceiver( fully_qualified_namespace=fully_qualified_namespace, credential=ServiceBusSharedKeyCredential( shared_access_policy, shared_access_key ), queue_name=queue_name ) 

Close down the handler links (and connection if the handler uses a separate connection).

If the handler has already closed, this operation will do nothing.

None

Create a ServiceBusSessionReceiver from a connection string.

conn_str – The connection string of a Service Bus.

• queue_name (str) – The path of specific Service Bus Queue the client connects to.

• topic_name (str) – The path of specific Service Bus Topic which contains the Subscription the client connects to.

• subscription_name (str) – The path of specific Service Bus Subscription under the specified Topic the client connects to.

• mode (ReceiveSettleMode) – The mode with which messages will be retrieved from the entity. The two options are PeekLock and ReceiveAndDelete. Messages received with PeekLock must be settled within a given lock period before they will be removed from the queue. Messages received with ReceiveAndDelete will be immediately removed from the queue, and cannot be subsequently rejected or re-received if the client fails to process the message. The default mode is PeekLock.

• session_id (str) – A specific session from which to receive. This must be specified for a sessionful entity, otherwise it must be None. In order to receive messages from the next available session, set this to None. The default is None.

• prefetch (int) – The maximum number of messages to cache with each request to the service. The default value is 0, meaning messages will be received from the service and processed one at a time. Increasing this value will improve message throughput performance but increase the change that messages will expire while they are cached if they’re not processed fast enough.

• idle_timeout (float) – The timeout in seconds between received messages after which the receiver will automatically shutdown. The default value is 0, meaning no timeout.

• logging_enable (bool) – Whether to output network trace logs to the logger. Default is False.

• retry_total (int) – The total number of attempts to redo a failed operation when an error occurs. Default value is 3.

• transport_type (TransportType) – The type of transport protocol that will be used for communicating with the Service Bus service. Default is TransportType.Amqp.

• http_proxy (dict) – HTTP proxy settings. This must be a dictionary with the following keys: ‘proxy_hostname’ (str value) and ‘proxy_port’ (int value). Additionally the following keys may also be present: ‘username’, ‘password’.

ServiceBusSessionReceiver

Example:

import os from azure.servicebus import ServiceBusReceiver servicebus_connection_str = os.environ['SERVICE_BUS_CONNECTION_STR'] queue_name = os.environ['SERVICE_BUS_QUEUE_NAME'] queue_receiver = ServiceBusReceiver.from_connection_string( conn_str=servicebus_connection_str, queue_name=queue_name ) 

Browse messages currently pending in the queue.

Peeked messages are not removed from queue, nor are they locked. They cannot be completed, deferred or dead-lettered.

• message_count (int) – The maximum number of messages to try and peek. The default value is 1.

• sequence_number (int) – A message sequence number from which to start browsing messages.

list[PeekMessage]

Example:

with servicebus_receiver: messages = servicebus_receiver.peek() for message in messages: print(message) 

Receive a batch of messages at once.

This approach it optimal if you wish to process multiple messages simultaneously. Note that the number of messages retrieved in a single batch will be dependent on whether prefetch was set for the receiver. This call will prioritize returning quickly over meeting a specified batch size, and so will return as soon as at least one message is received and there is a gap in incoming messages regardless of the specified batch size.

• max_batch_size (int) – Maximum number of messages in the batch. Actual number returned will depend on prefetch size and incoming stream rate.

• max_wait_time (float) – Maximum time to wait in seconds for the first message to arrive. If no messages arrive, and no timeout is specified, this call will not return until the connection is closed. If specified, an no messages arrive within the timeout period, an empty list will be returned.

list[Message]

Example:

with servicebus_receiver: messages = servicebus_receiver.receive(max_wait_time=5) for message in messages: print(message) message.complete() 

Receive messages that have previously been deferred.

When receiving deferred messages from a partitioned entity, all of the supplied sequence numbers must be messages from the same partition.

sequence_numbers (list[int]) – A list of the sequence numbers of messages that have been deferred.

list[ReceivedMessage]

Example:

with servicebus_receiver: deferred_sequenced_numbers = [] messages = servicebus_receiver.receive(max_wait_time=5) for message in messages: deferred_sequenced_numbers.append(message.sequence_number) print(message) message.defer() received_deferred_msg = servicebus_receiver.receive_deferred_messages( sequence_numbers=deferred_sequenced_numbers ) for msg in received_deferred_msg: msg.complete() 

Get the ServiceBusSession object linked with the receiver. Session is only available to session-enabled entities.

ServiceBusSession

Example:

 with servicebus_client.get_queue_session_receiver(queue_name=queue_name, session_id=session_id) as receiver: session = receiver.session 

The ServiceBusSession is used for manage session states and lock renewal.

Please use the instance variable `session` on the ServiceBusReceiver to get the corresponding ServiceBusSession object linked with the receiver instead of instantiating a ServiceBusSession object directly.

auto_renew_error (AutoLockRenewTimeout or AutoLockRenewFailed) – Error when AutoLockRenew is used and it fails to renew the session lock.

Example:

 with servicebus_client.get_queue_session_receiver(queue_name=queue_name, session_id=session_id) as receiver: session = receiver.session 

Get the session state.

Returns None if no state has been set.

str

Example:

 with servicebus_client.get_queue_session_receiver(queue_name=queue_name, session_id=session_id) as receiver: session = receiver.session session_state = session.get_session_state() 

Renew the session lock.

This operation must be performed periodically in order to retain a lock on the session to continue message processing. Once the lock is lost the connection will be closed. This operation can also be performed as a threaded background task by registering the session with an azure.servicebus.AutoLockRenew instance.

Example:

 with servicebus_client.get_queue_session_receiver(queue_name=queue_name, session_id=session_id) as receiver: session = receiver.session session_state = session.renew_lock() 

Set the session state.

state (str, bytes or bytearray) – The state value.

Example:

 with servicebus_client.get_queue_session_receiver(queue_name=queue_name, session_id=session_id) as receiver: session = receiver.session session_state = session.set_session_state("START") 

Whether the receivers lock on a particular session has expired.

bool

The time at which this session’s lock will expire.

datetime.datetime

Session id of the current session.

str

The ServiceBusSender class defines a high level interface for sending messages to the Azure Service Bus Queue or Topic.

• fully_qualified_namespace (str) – The fully qualified host name for the Service Bus namespace. The namespace format is: <yournamespace>.servicebus.windows.net.

• entity_name (str) – The name of the entity that the client connects to.

• fully_qualified_namespace (str) – The fully qualified host name for the Service Bus namespace. The namespace format is: <yournamespace>.servicebus.windows.net.

• credential (TokenCredential) – The credential object used for authentication which implements a particular interface for getting tokens. It accepts ServiceBusSharedKeyCredential, or credential objects generated by the azure-identity library and objects that implement the get_token(self, *scopes) method.

• queue_name (str) – The path of specific Service Bus Queue the client connects to.

• topic_name (str) – The path of specific Service Bus Topic the client connects to.

• logging_enable (bool) – Whether to output network trace logs to the logger. Default is False.

• retry_total (int) – The total number of attempts to redo a failed operation when an error occurs. Default value is 3.

• transport_type (TransportType) – The type of transport protocol that will be used for communicating with the Service Bus service. Default is TransportType.Amqp.

• http_proxy (dict) – HTTP proxy settings. This must be a dictionary with the following keys: ‘proxy_hostname’ (str value) and ‘proxy_port’ (int value). Additionally the following keys may also be present: ‘username’, ‘password’.

Example:

import os from azure.servicebus import ServiceBusSender, ServiceBusSharedKeyCredential fully_qualified_namespace = os.environ['SERVICE_BUS_FULLY_QUALIFIED_NAMESPACE'] shared_access_policy = os.environ['SERVICE_BUS_SAS_POLICY'] shared_access_key = os.environ['SERVICE_BUS_SAS_KEY'] queue_name = os.environ['SERVICE_BUS_QUEUE_NAME'] queue_sender = ServiceBusSender( fully_qualified_namespace=fully_qualified_namespace, credential=ServiceBusSharedKeyCredential( shared_access_policy, shared_access_key ), queue_name=queue_name ) 

Cancel one or more messages that have previously been scheduled and are still pending.

sequence_numbers (int or list[int]) – The sequence numbers of the scheduled messages.

None

~azure.servicebus.exceptions.ServiceBusError if messages cancellation failed due to message already cancelled or enqueued.

Example:

with servicebus_sender: servicebus_sender.cancel_scheduled_messages(sequence_nums) 

Close down the handler links (and connection if the handler uses a separate connection).

If the handler has already closed, this operation will do nothing.

None

Create a BatchMessage object with the max size of all content being constrained by max_size_in_bytes. The max_size should be no greater than the max allowed message size defined by the service.

max_size_in_bytes (int) – The maximum size of bytes data that a BatchMessage object can hold. By default, the value is determined by your Service Bus tier.

BatchMessage

Example:

with servicebus_sender: batch_message = servicebus_sender.create_batch() batch_message.add(Message("Single message inside batch")) 

Create a ServiceBusSender from a connection string.

conn_str – The connection string of a Service Bus.

• queue_name (str) – The path of specific Service Bus Queue the client connects to. Only one of queue_name or topic_name can be provided.

• topic_name (str) – The path of specific Service Bus Topic the client connects to. Only one of queue_name or topic_name can be provided.

• logging_enable (bool) – Whether to output network trace logs to the logger. Default is False.

• retry_total (int) – The total number of attempts to redo a failed operation when an error occurs. Default value is 3.

• transport_type (TransportType) – The type of transport protocol that will be used for communicating with the Service Bus service. Default is TransportType.Amqp.

• http_proxy (dict) – HTTP proxy settings. This must be a dictionary with the following keys: ‘proxy_hostname’ (str value) and ‘proxy_port’ (int value). Additionally the following keys may also be present: ‘username’, ‘password’.

ServiceBusSenderClient

Example:

import os from azure.servicebus import ServiceBusSender servicebus_connection_str = os.environ['SERVICE_BUS_CONNECTION_STR'] queue_name = os.environ['SERVICE_BUS_QUEUE_NAME'] queue_sender = ServiceBusSender.from_connection_string( conn_str=servicebus_connection_str, queue_name=queue_name ) 

Send Message or multiple Messages to be enqueued at a specific time. Returns a list of the sequence numbers of the enqueued messages. :param messages: The message or list of messages to schedule. :type messages: ~azure.servicebus.Message or list[~azure.servicebus.Message] :param schedule_time_utc: The utc date and time to enqueue the messages. :type schedule_time_utc: ~datetime.datetime :rtype: list[int]

Example:

with servicebus_sender: scheduled_time_utc = datetime.datetime.utcnow() + datetime.timedelta(seconds=30) scheduled_messages = [Message("Scheduled message") for _ in range(10)] sequence_nums = servicebus_sender.schedule(scheduled_messages, scheduled_time_utc) 

Sends message and blocks until acknowledgement is received or operation times out.

If a list of messages was provided, attempts to send them as a single batch, throwing a ValueError if they cannot fit in a single batch.

message (Message or BatchMessage or list[Message]) – The ServiceBus message to be sent.

None

~azure.servicebus.exceptions.OperationTimeoutError if sending times out.

~azure.servicebus.exceptions.MessageContentTooLarge if the size of the message is over service bus frame size limit.

~azure.servicebus.exceptions.MessageSendFailed if the message fails to send

~azure.servicebus.exceptions.ServiceBusError when other errors happen such as connection error, authentication error, and any unexpected errors. It’s also the top-level root class of above errors.

Example:

with servicebus_sender: message = Message("Hello World") servicebus_sender.send(message) 

The shared access key credential used for authentication.

• policy (str) – The name of the shared access policy.

• key (str) – The shared access key.

Transport type The underlying transport protocol type:

Amqp: AMQP over the default TCP transport protocol, it uses port 5671. AmqpOverWebsocket: Amqp over the Web Sockets transport protocol, it uses port 443.

Auto renew locks for messages and sessions using a background thread pool.

• executor (ThreadPoolExecutor) – A user-specified thread pool. This cannot be combined with setting max_workers.

• max_workers (int) – Specify the maximum workers in the thread pool. If not specified the number used will be derived from the core count of the environment. This cannot be combined with executor.

Example:

from azure.servicebus import AutoLockRenew lock_renewal = AutoLockRenew(max_workers=4) with servicebus_receiver: for message in servicebus_receiver: # Auto renew message for 1 minute. lock_renewal.register(message, timeout=60) process_message(message) message.complete() 

 from azure.servicebus import AutoLockRenew lock_renewal = AutoLockRenew(max_workers=4) with servicebus_client.get_queue_session_receiver(queue_name=queue_name, session_id=session_id) as receiver: session = receiver.session # Auto renew session lock for 2 minutes lock_renewal.register(session, timeout=120) for message in receiver: process_message(message) message.complete() 

Register a renewable entity for automatic lock renewal.

• renewable (ReceivedMessage or Session) – A locked entity that needs to be renewed.

• timeout (float) – A time in seconds that the lock should be maintained for. Default value is 300 (5 minutes).

Shutdown the thread pool to clean up any remaining lock renewal threads.

wait (bool) – Whether to block until thread pool has shutdown. Default is True.

Subpackages¶

Submodules¶

azure.servicebus.exceptions module¶

An attempt to renew a lock on a message or session in the background has failed.

Exception.with_traceback(tb) – set self.__traceback__ to tb and return self.

The time allocated to renew the message or session lock has elapsed.

Exception.with_traceback(tb) – set self.__traceback__ to tb and return self.

Failed to settle the message.

An attempt was made to complete an operation on a message that has already been settled (completed, abandoned, dead-lettered or deferred). This error will also be raised if an attempt is made to settle a message received via ReceiveAndDelete mode.

Exception.with_traceback(tb) – set self.__traceback__ to tb and return self.

Message content is larger than the service bus frame size

Exception.with_traceback(tb) – set self.__traceback__ to tb and return self.

A message failed to send because the message is in a wrong state

Exception.with_traceback(tb) – set self.__traceback__ to tb and return self.

The lock on the message has expired and it has been released back to the queue.

It will need to be received again in order to settle it.

Exception.with_traceback(tb) – set self.__traceback__ to tb and return self.

A message failed to send to the Service Bus entity.

Exception.with_traceback(tb) – set self.__traceback__ to tb and return self.

Attempt to settle a message failed.

Exception.with_traceback(tb) – set self.__traceback__ to tb and return self.

No active Sessions are available to receive from.

Exception.with_traceback(tb) – set self.__traceback__ to tb and return self.

Operation timed out.

Exception.with_traceback(tb) – set self.__traceback__ to tb and return self.

An error occured when authenticate the connection.

Exception.with_traceback(tb) – set self.__traceback__ to tb and return self.

An error occured when authorizing the connection.

Exception.with_traceback(tb) – set self.__traceback__ to tb and return self.

An error occured in the connection.

Exception.with_traceback(tb) – set self.__traceback__ to tb and return self.

An error occured.

This is the parent of all Service Bus errors and can be used for default error handling.

Exception.with_traceback(tb) – set self.__traceback__ to tb and return self.

The Service Bus entity could not be reached.

Exception.with_traceback(tb) – set self.__traceback__ to tb and return self.

The lock on the session has expired.

All unsettled messages that have been received can no longer be settled.

Exception.with_traceback(tb) – set self.__traceback__ to tb and return self.

ncG1vNJzZmiZqqq%2Fpr%2FDpJuom6Njr627wWeaqKqVY8SqusOorqxmnprBcHDWnploqKmptbC6jpqxrqqVYsCmvtWimp6apah8eHqPZ2ebal%2BWx7a%2BxGeqnqqmnrCmrtSsZaGsnaE%3D